1. Before installation and debugging, check whether the shell is intact and whether the product accessories are complete.
2. When the product is just powered on, the fan does not rotate and the screen is off; press the "power" button, the fan starts to work, the screen displays " ON ", and automatically switches to the TVOC display interface within 5s , the active oxygen gear is 0 , and the wind speed gear 1 . If it does not work normally, it should be returned to the factory for maintenance.
3. Because the TVOC gas sensor is used inside the optical plasma intelligent purifier , it needs to be preheated for 10-15 minutes to collect the gas data in the room. After the screen data is stable, the relevant operations can be carried out .。
4. Download or scan the QR code in the manual from the mobile phone store, install the "Easy Micro Link" APP , and register for certification. For related operations, please refer to the use and operation.
5. During the process of adding devices on the mobile APP , only one mobile phone can be paired with one device.
①UV4000 light plasma intelligent purifier display description:
a) The product is powered on, click the "Power On" button, the screen will display " ON ", if it is not connected to the Internet, the WIFI icon will flash; if the Internet connection is successful, the WIFI icon will be always on.
b) Click the "wind speed" button, the screen will display the wind speed gear, wind speed icon, WIFI icon.
c) Click the "active oxygen" button, the screen will display the TVOC value, active oxygen gear, icon and WIFI icon in the room.
d) Click the "timing" button (this button is only triggered under the active oxygen and wind speed interface), the screen displays the timing time (unit: h ), the timing time icon, WIFI icon.
e）Click the "Sleep" button (this button is only triggered in the active oxygen and wind speed interface), the screen only displays the sleep icon.
②APPAPP display description
a） The status of the child lock on or off is set through the APP , and it is displayed and turned off on the host screen at the same time.
b） The status of negative ions on or off is set through the APP to realize the function of negative ions.
c） The ozone adjustment gear of the mobile APP is consistent with the display on the host screen.
d） The wind speed adjustment gear of the mobile APP is consistent with the display on the host screen.
e） Timing adjustment of the host and APP , the timing time is valid with the last adjustment.
f） The opening or closing of the automatic mode is set through the APP , and " AUTO " is displayed on the host screen at the same time .
g） When the sleep mode is turned on, the wind speed is fixed to silent mode, the active oxygen is turned off, and the anaerobic lamp works; when the sleep mode is exited, the wind speed and active oxygen gear are switched to the state before entering the sleep mode.
Method of exclusion
The host is not in pairing mode (the WIFI icon is off)
1. When not in the "ON" interface, click the "Timer" and "Sleep" buttons at the same time.
2、 The router in the room is faulty or not turned on.
1、 Check whether the host is turned on and working normally.
2、 Check whether the router in the room is working normally.
APP pairing failed
1、 The mobile APP is not connected to the WIFI in the room.
2、 The host does not enter pairing mode.
3、 The host does not enter pairing mode.
4、 The host does not enter pairing mode.
5、 The location permission is not allowed.
1、 Make sure that the mobile APP is connected to the WIFI in the room .
2、 Check if the host is in pairing mode
3、 Check whether the WIFI password is correct
4、 Place the host and mobile phone as close to the WIFI router as possible.
5、 Allow APP to access location permissions
The display showsE01
Electrodeless lamp no-load
1、Check the electrodeless lamp
The display showsE04
Electrodeless lamp overcurrent and overvoltage protection
1、Check the ballast of the electrodeless lamp
The display showsE07
254 Oxygen-free lamp or ballast is broken
Check 254 anaerobic lamp or 254 ballast
The display showsE08
Fan does not turn
Check the fan for damage
The display showsE09
12V power module has no output
Check UV4000- Motherboard 12V Power Module