UV4000 intelligent Photoplasma air purifier Purifier
Smart and versatile, home products for air sterilization and formaldehyde removal
描述
Working voltage: AC200V~AC220V
Power:60W
Control method: mobile phone remote  control + device button
Applicable area: 20 – 50㎡
Disinfection method: ultraviolet, ozone, negative ions
Air volume: 19 – 65 cubic meters per hour
Air volume: 19 – 65 cubic meters per hour

Display device: LED custom screen
Operating temperature: 0~70 degrees
Size : 415×294×188mm
Weight: 3.6Kg Shell
material: ABS
Fault detection: The fault is indicated by the abnormal TVOC value displayed on the device interface and mobile APP

The UV4000 intelligent optical plasma purifier uses high-precision sensors to detect the gas in the room in real time and display it through the LED display.

Secondly, the active oxygen generated by short-wave ultraviolet is used to purify the air, and advanced active oxygen control technology is added;
the active oxygen , wind speed, and negative ions are controlled by the purifier buttons or mobile APP to make the living environment air fresh.
UV4000 intelligent optical plasma purifier also has timing , sleep, automatic, child lock and other functions for users to set by themselves.




Technical characteristics

Wind speed: Control the wind speed gear (1-10 gears), click to increase the gear, jump to the minimum gear when it increases to the maximum, and cycle in turn.

Active oxygen: Control the active oxygen gear (0-10 gears), click the gear to decrease by one, and jump to the maximum gear when it is reduced to 0 gear, and cycle in turn.

Power on: Control the power on and off, and the operation settings of other keys can be performed only after the power is turned on.

Timing: Control the on and off time of the smart light plasma purifier (0 – 5 hours), click to increase.

Sleep: Set the sleep mode, click to enter the sleep mode, the screen will display the sleep icon, and the wind speed and active oxygen will be automatically adjusted to the minimum.

gear;click again to wake up from sleep.

4. Control method: ①The interface button controls and sets the optical plasma intelligent purifier.

              ②Connect to WIFI mobile APP (Android and Apple systems) for intelligent control.


 


Structural features and working principle

 1. The product is a three-dimensional structure, and the outline diagram is as follows:

宠物净化器说明2



2. Working principle:

Provides power to microcontrollers, displays, and related devices. The TVOC sensor detects the gas in the room in real time, sends the data to the microcontroller for data processing, and displays it through the display screen. The active oxygen output, wind speed and negative ions of the optical plasma intelligent purifier are controlled according to the TVOC value.



Installation and debugging

1. Before installation and debugging, check whether the shell is intact and whether the product accessories are complete.

2. When the product is just powered on, the fan does not rotate and the screen is off; press the "power" button, the fan starts to work, the screen displays " ON ", and automatically switches to the TVOC display interface within 5s , the active oxygen gear is 0 , and the wind speed gear 1 . If it does not work normally, it should be returned to the factory for maintenance.

3. Because the TVOC gas sensor is used inside the optical plasma intelligent purifier , it needs to be preheated for 10-15 minutes to collect the gas data in the room. After the screen data is stable, the relevant operations can be carried out .

4. Download or scan the QR code in the manual from the mobile phone store, install the "Easy Micro Link" APP , and register for certification. For related operations, please refer to the use and operation.

5. During the process of adding devices on the mobile APP , only one mobile phone can be paired with one device.


UV4000 light plasma intelligent purifier display description:

a) The product is powered on, click the "Power On" button, the screen will display " ON ", if it is not connected to the Internet, the WIFI icon will flash; if the Internet connection is successful, the WIFI icon will be always on.

b) Click the "wind speed" button, the screen will display the wind speed gear, wind speed icon, WIFI icon.

c) Click the "active oxygen" button, the screen will display the TVOC value, active oxygen gear, icon and WIFI icon in the room.

d) Click the "timing" button (this button is only triggered under the active oxygen and wind speed interface), the screen displays the timing time (unit: h ), the timing time icon, WIFI icon.

e)Click the "Sleep" button (this button is only triggered in the active oxygen and wind speed interface), the screen only displays the sleep icon.

APPAPP display description

a) The status of the child lock on or off is set through the APP , and it is displayed and turned off on the host screen at the same time.

b) The status of negative ions on or off is set through the APP to realize the function of negative ions.

c) The ozone adjustment gear of the mobile APP is consistent with the display on the host screen.

d) The wind speed adjustment gear of the mobile APP is consistent with the display on the host screen.

e) Timing adjustment of the host and APP , the timing time is valid with the last adjustment.

f) The opening or closing of the automatic mode is set through the APP , and " AUTO " is displayed on the host screen at the same time .

g) When the sleep mode is turned on, the wind speed is fixed to silent mode, the active oxygen is turned off, and the anaerobic lamp works; when the sleep mode is exited, the wind speed and active oxygen gear are switched to the state before entering the sleep mode.



Troubleshooting and troubleshooting


fault phenomenon

Cause Analysis

Method of exclusion

The host is not in pairing mode (the WIFI icon is off)

1. When not in the "ON" interface, click the "Timer" and "Sleep" buttons at the same time.

2、 The router in the room is faulty or not turned on.

1、 Check whether the host is turned on and working normally.

2、 Check whether the router in the room is working normally.

APP pairing failed

1、 The mobile APP is not connected to the WIFI in the room.

2、 The host does not enter pairing mode.

3、 The host does not enter pairing mode.

4、 The host does not enter pairing mode.

5、 The location permission is not allowed.

1、 Make sure that the mobile APP is connected to the WIFI in the room .

2、 Check if the host is in pairing mode

3、 Check whether the WIFI password is correct

4、  Place the host and mobile phone as close to the WIFI router as possible.

5、 Allow APP to access location permissions

The display showsE01

Electrodeless lamp no-load

1、Check the electrodeless lamp

The display showsE04

Electrodeless lamp overcurrent and overvoltage protection

1、Check the ballast of the electrodeless lamp

The display showsE07

254 Oxygen-free lamp or ballast is broken

Check 254 anaerobic lamp or 254 ballast

The display showsE08

Fan does not turn

Check the fan for damage

The display showsE09

12V power module has no output

Check UV4000- Motherboard 12V Power Module



Maintenance and Repair

1、 The host should be checked once a month to ensure the normal operation of the system.

2、 The filter screen (located at the bottom of the device) should be cleaned every month, rinsed with clean water and dried before installation.

3、  Keep the equipment in good condition and clean, and contact the manufacturer in time if any problem is found .

4、  If the equipment is damaged, our company is responsible for maintenance. If you find any problems, please contact our company in time. If the user disassembles or repairs it by himself, he will not enjoy the after-sale warranty service.


If the equipment is damaged, our company is responsible for maintenance. If you find any problems, please contact our company in time. If the user disassembles or repairs it by himself, he will not enjoy the after-sale warranty service.

1. The outer packaging of the product adopts carton and so on.

2. The product shall not be directly affected by rain, frost and fog during transportation, and shall not be damaged by direct extrusion or impact.

3. The product should be stored in a ventilated, dry warehouse with a relative humidity of less than 85%, more than 50mm above the ground; the stacking height should not exceed 5 layers.  

Unpacking and Inspection

1. When you buy this product, you should unpack and check on the spot, and check all items according to the packing list.

1. When you buy this product, you should unpack and check on the spot, and check all items according to the packing list.

1. When you buy this product, you should unpack and check on the spot, and check all items according to the packing list.

Precautions for safe use

1. Pay attention to safety during installation and debugging to avoid electric shock accidents.

2. Our company is responsible for the maintenance of UV4000 intelligent optical plasma purifier. If you find any problems, please contact our company in time.