Two.. According to the current market product status to determine our product positioning andplanning
(1). At present, the market products (domestic and foreign brands) are characterized by single machine, and the technology is mainly filtration (physical filtration, better adding electrostatic dust removal).）
On the basis of this added small tricks, such as photocatalyst, (foreign has been proved not to have much effect), negative ions, etc., (do not play a major role) in short, the role and effect of single product is limited, whether domestic or foreign brands, this is a low-end product, we call the first generation of products.
(2).The fresh air system has gradually entered the market. Especially the foreign brand, its concept and single machine is completely different. It is not purification, but with outdoor fresh air, replace indoor dirty air, indoor turbid gas carbon dioxide and toxic and harmful gases for outdoor. After removing particles from the outdoor air, it is filled into the indoor, especially with oxygen (fresh air), so as to realize a breathing room. We call it the second generation, the trend product of the next decade, suitable for the middle class and above, at a high price right now. At the same time, the requirements of decoration is higher, and should be in the construction before decoration.
At present, the problem of copying foreign products is that outdoor air quality is better than indoor air quality in foreign countries, especially in developed countries. But in view of the current situation in China, sometimes the outdoor due to factors such as haze is sometimes the outdoor is not as good as the indoor quality, so our system cannot be called new wind. The difficulty of this system is not in "air change" and "heat recovery". But the governance and purification of external air.
The following figure shows the series of products involved in aerospace Hongda technology. Product planning chart
（3）The third-generation products have not been seen yet. Application of a variety of techniques for composite; The key external gas treatment system will be integrated with all the new technologies of Hongda and other technologies at home and abroad. Other auxiliary parts include heat recovery, indoor air flow and pressure organization. Multi-parameter air quality monitoring, remote control through the Internet of things, etc. 。
（4）Fourth generation products, modern intelligent environment control system, including temperature, humidity, air quality and other main functions. This system is extremely complex system, to provide a friendly and comfortable environment for people, particularly in a serious pollution in China's external environment and construction conditions of domestic, high co., LTD., area is finite, low cost, acceptable level at least middle class, it will be a high cross major multi-disciplinary, hardware and software system, this is the higher goal of our cooperation, It needs hundreds of millions of dollars of investment, but its future market, whether foreign or domestic, is huge. This can be put into the second phase planning of our cooperation, and the profits of the first phase may lay a foundation for the later planning. （5）Vehicle system is mainly used in the afterloading market at present, but its function and effect are limited. Hongda Company has integrated the above technology into the vehicle system to completely improve the existing interior environment conditions. The company's existing technology has a certain foundation (it has cooperated with Great Wall in the early stage).